21 22
Messaging settings5.1.3
• Text message
Profile settings
Profiles can be retrieved directly from SIM card. Alternatively,
you can create your own profile.
Voicemail server
View and edit the voicemail number.
Common settings
Delivery report, request for acknowledgement of delivery
report On/Off. Reply path
(1)
: show reply path. Save sent
messages: save all your sent messages.
Alphabet
management
Enables the definition of SMS data coding for SMS sending.
Memory status
Show memory used on the phone and SIM card.
Preferred storage
Select default message storage, SIM or phone.
Preferred bearer
Bearer preference.
• Multimedia message
Data account
Select your data account for multimedia messages.
Common settings
Edit
Set slide timing, edit mode, image size, signature,
etc.
Send
Set the values for validity period, Read report, etc.
Retrieve
Set the values for Home network, Roaming
network, etc.
Memory
status
Show memory used on the phone and SIM card.
Preferred
storage
Select default message storage, Phone or SD
card.
• Broadcast SMS
(1)
Receiving mode
Enable to receive broadcast SMS.
Languages
Language selection.
Channel settings
Select/Add/Edit/Delete channels.
Read message
Select to read Broadcast SMS.
(1)
Depending on your network operator.
Email5.2
Your phone has an email client with the settings pre-defined for a few popular email
services like – Gmail, Sky, AOL, etc. Besides these, you can set up other POP3 or IMAP4
email accounts that you may be using.
Email account set-up5.2.1
Pre-defined email service
If you own an email account with a predefined service, you can install it to your phone
by selecting the service (Gmail, Sky, etc.), entering the username, password and account
name, and then confirming by selecting "OK".
New email service
To set up a new email account other than the predefined email services, select "Other
Email accounts".
You are required to enter your email address, display name, password, account name,
then confirm with "Save". Afterwards you‘ll need to select protocol
(1)
(POP3 or IMAP4),
then enter your incoming server address and outgoing server address, and finally select
"Save".
(1)
Consult your email service provider for more information about protocol.
To Next Page
Loading...
