51 52
Settings20 .....................................................
From the main menu, select the menu icon and select the function of your choice in
order to customise your phone.
Device sound profiles20.1
General20.1.1
To modify the sound settings, select "Edit" to reveal the following functions using the
key:
Ringtone
Select a melody from the list by scrolling up/down.
Mode
You may set your phone ringtone to Normal, Discreet (ring with
beep), Vibration (all sounds are replaced by vibrations except
for alarms), Vibration+melody, Vibration then melody, Beep and
vibration, Silence (no sounds except for alarms, the icon will be
displayed).
Ring type
Select the type for ringtone.
Volume
Adjust the volume using the
key.
Keypad
You may set your keypad sound profile to Silence, Beep 1, Beep 2,
Beep 3.
Message beep
Select a melody for a new incoming message.
Power on beep
Select a Power on melody for your phone.
Power off beep
Select a Power off melody for your phone.
Silent20.1.2
This profile will turn off all ringtones, even notification sounds.
Flight mode20.2
In Flight mode, voice calls, Bluetooth, messaging and other network related functions are
barred. It can be used to increase standby duration.
Device settings20.3
A set of basic phone settings for you to adjust.
Display 20.3.1
Wallpaper
The wallpaper is displayed when you switch on your phone.
By selecting "Wallpaper" you can customise it by replacing the default image or
animation displayed on your phone.
Set power on/off image
(1)
You can customise your welcome animation or image that appears when you switch on
your phone. You can also customise your power off screen with an image or animation.
Brightness
You may adjust the white balance of the LCD display.
Keypad backlight
Select to set backlight time for keypad.
Set languages 20.3.2
(1)
From this menu, you can set both display language and writing language. The "Auto"
option selects the language according to the home network (if available).
Time and date20.3.3
Refer to page 42.
Headset mode20.3.4
Switch audio play (incoming call, message beep, alarm beep...) between Headset only
and Phone and Headset.
(1)
Contact your network operator to check service availability.