10
2. Pull out the card tray. You can place a nano-SIM card on
the right card slot, and place a microSD card on the left
card slot, as shown. Carefully slide the tray back into place.
Charging the battery
Your phone’s battery should have enough power for the phone
to turn on, find a signal, and make a few calls. You should fully
charge the battery as soon as possible.
If the battery is low, there will be a pop-up message on the
screen.
NOTE:
Your phone supports QuickCharge 2.0. To use it, you need to
buy the compatible QuickCharge accessories which are sold
separately.
WARNING!
Use only approved chargers and cables. The use of unapproved
accessories could damage your phone or cause the battery to
explode.
To Next Page
Loading...