48
2. Slide the switch to the On position.
3. Touch Add network at the bottom of the Wi-Fi networks
list.
4. Enter the network SSID (name). If necessary, enter
security or other network configuration details.
5. Touch SAVE.
Connect to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which support WPS.
You can use one of the following methods to connect your
phone to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Swipe up on the home screen and touch Settings >
Network & Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Wi-Fi preferences > WPS Push Button.
4. Press the WPS button on the access point and the access
point will recognise your phone and add it to the
network.
Method two: PIN number
1. Swipe up on the home screen and touch Settings >
Network & Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Wi-Fi preferences > WPS Pin Entry.
4. The WPS PIN number displays on the screen. Enter the
PIN number into the access point's setup page.
After entering the PIN number, your phone automatically
finds the access point and configures the connection.
To Next Page
Loading...