What to do if suspected water in VODASAFE AquaEye Measuring Instruments?
If you suspect there is water in your VODASAFE Measuring Instruments device, immediately power it off and do not attempt to charge it. Contact VodaSafe for further assistance.
What to do if temperature limit has been reached in VODASAFE AquaEye Measuring Instruments?
If the temperature limit has been reached on your VODASAFE Measuring Instruments, place the AquaEye® in a cooler or warmer environment, depending on the current temperature, to return it to an acceptable operating range.
General| Operating Depth | Up to 50 meters |
|---|---|
| Battery Life | Up to 8 hours |
| Waterproof Rating | IP68 |
| Connectivity | Bluetooth |
| Target Identification Range | Up to 50 meters |
| Display | LCD |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
Covers intended uses, users, and excluded uses for the AquaEye® device.
Details safety regarding device integrity, parts, battery, and operational limits.
Outlines operator responsibilities for water safety, training, and safe device handling.
Specifies a one-year warranty covering manufacturing and material defects.
Explains battery lifespan is based on chemical age and usage, not covered by warranty.
Introduces AquaEye® as an advanced underwater scanner using AI and ultrasound for body identification.
Lists the included AquaEye®, Storage Case, Charging Dock, and AC Adaptor.
Explains how to power the device on/off and select scanning range options.
Details steps for drying the device, placing the dock, plugging in, seating the device, and monitoring charging status.
Emphasizes incorporating device use into procedures and training staff for effective operation.
Provides a step-by-step visual guide to turning on, selecting range, positioning, submerging, and scanning.
Covers turning on, selecting range, positioning, and submerging the device.
Details how to scan an area, including sensor submersion, trigger use, and scan speeds.
Identifies and explains screen elements like Feedback Bar, Live Cursor, and Battery Level.
Explains how to read the Feedback Bar, 'X'/'O' symbols, and the Live Cursor.
Covers aligning the live cursor, direction to navigate, and re-scanning for triangulation.
Explains sonar beam reach (up to 50m) and depth (approx. 5m).
Details 360-degree scanning and scanning at greater depths by tilting the device.
Explains the Echo Map Display shows raw sonar echoes with intensity on a color scale.
Covers color legend, identifying obstacles, and interpreting high intensity signals.
Advises switching to shorter ranges for increased display resolution and object investigation.
Addresses large gaps in the feedback bar and suggests solutions like scanning slower or in sections.
Covers scenarios where known objects are not detected and suggests checking angle, submersion, or obstructions.
Suggests repeating scans and changing location to improve results and avoid obstructions.
Details scanning from shore, dock, and boat, noting specific considerations for each.
Advises rinsing the device in fresh water after use and drying thoroughly.
Recommends optimizing battery performance and specifies storage temperature requirements.
Addresses the device not turning on, suggesting checking battery charge.
Covers charging issues, temperature limits, and suspected water in the device.
Instructs users to register their device online for access to digital content and training.
Details the one-year warranty and directs users to VodaSafe for more information.
Provides contact details for customer service via email, phone, and online.
To Next Page