Need help?Do you have a question about the vogel's WALL 3205 and is the answer not in the manual?
Secure the mounting strips (B) to the back of your TV screen as per instructions.
Pull the release strips downwards to prepare for screen removal.
Place the release block (C) behind the TV and cut release strips to the correct length.
Take off the protective cover from the wall mount component.
Drill the necessary holes in the wall using the spirit level for accuracy.
Securely attach the wall mount (A) to the wall using appropriate screws.
Replace the protective cover onto the wall mount component.
Position the TV screen onto the wall mount and secure it by pulling release strips.
To Next Page
General
