To Next PageTo Next Page
Need help?Do you have a question about the vogel's NEXT 7345 and is the answer not in the manual?
General| Turn angle | 120 ° |
|---|---|
| Cable management | Yes |
| Number of pivot points | 3 |
| Distance to the wall (max) | 720 mm |
| Distance to the wall (min) | 72 mm |
| Net weight | 11.1 g |
| Tare weight | 1160 g |
| Quantity per pallet | 18 pc(s) |
| Mounting type | Wall |
| Maximum VESA mount | 600 x 400 mm |
| Minimum VESA mount | 200 x 200 mm |
| Maximum screen size | 65 \ |
| Minimum screen size | 40 \ |
| Maximum weight capacity | 30 kg |
| Panel mounting interface | 200 x 200, 200 x 300, 300 x 300, 300 x 200, 400 x 200, 400 x 400, 400 x 600 mm |
| Number of displays supported | 1 |
| Package depth | 849 mm |
| Package width | 517 mm |
| Package height | 115 mm |
| Product color | Black |
| Housing material | Aluminium, Chrome |
Scan QR-code to watch the installation movie on YouTube.
Use cable holders to store excess cables neatly.
Check screen hole pattern and adapt frame width if necessary.
Screw the wall mount (C) onto the wall, starting with the smallest hole (X).
Hook the TV onto the wall mount (C) via the upper screw.
Pull TV away from wall, ensuring both arms are fully extended.
Center cables using velcro (Y); guide through ties (Z) but don't tighten yet.
