Do you have a question about the Void STASYS X and is the answer not in the manual?
Key attributes of the Stasys X loudspeaker system, including woofers, cabinets, wheels, and grilles.
Details on speakon connectors, wiring, link output, and internal woofer configuration.
Important safety and handling advice regarding environment and magnetic fields for the Stasys X.
Detailed technical data including frequency response, sensitivity, impedance, power handling, and output.
Key attributes of the Stasys X loudspeaker system, including woofers, cabinets, wheels, and grilles.
Details on speakon connectors, wiring, link output, and internal woofer configuration.
Important safety and handling advice regarding environment and magnetic fields for the Stasys X.
Detailed technical data including frequency response, sensitivity, impedance, power handling, and output.
The document provides an owner's manual for the Stasys X loudspeaker, manufactured by Void Acoustics and distributed by Fusion Event Services.
The Stasys X is a high-performance, professional-grade loudspeaker designed for sound reinforcement applications. It is a subwoofer enclosure, indicated by its frequency response and driver configuration, optimized for delivering powerful low-frequency output. The system is designed for reliability and durability, suitable for demanding environments.
Frequency Response: The Stasys X has a frequency response of 33 Hz to 200 Hz at -3dB points, indicating its capability to reproduce deep bass frequencies.
Sensitivity: The low-frequency (LF) sensitivity is 105 dB at 1 watt/1 meter, signifying high efficiency in converting power into sound pressure.
Impedance: The nominal impedance of the enclosure is 4 ohms. This is achieved by connecting two 8-ohm woofers in parallel.
Power Handling: The Stasys X can handle 2800 watts RMS, demonstrating its robust power capacity.
Maximum Output: It can achieve a continuous maximum output of 138 dB and a peak output of 142 dB, indicating its ability to produce very high sound pressure levels.
Dispersion: The dispersion pattern is "Array Dependent," suggesting it is designed to be used in arrays for controlled sound coverage.
Crossover Point: The manual specifies crossover points for both high-pass and low-pass filters:
Driver Configuration: The enclosure houses two 18-inch drivers, each with a 125 mm voice coil, utilizing neodymium (neo) magnets.
Construction: The cabinet is constructed from 18 mm, 15-laminate birch plywood, ensuring superior strength and durability. The finish is textured polyurethane.
Grill: The Stasys X features a perforated steel grill with foam filters, designed to be kick-proof and protect internal components from heavy abuse.
Connectors: It uses 2 x 4-pole speakON™ connectors. These connectors are wired in parallel, allowing one to be used as an input and the other as a link output to connect additional enclosures.
Dimensions:
Weight:
Reliability and Output: The Stasys X incorporates close tolerance and durable woofers, which contribute to increased reliability and greater output.
Heat Transference Technology (HTT): This technology is integrated to maintain low power compression, ensuring consistent performance even during extended use.
Cabinet Strength: The accurately machined 15-laminate birch plywood cabinets provide superior structural strength, enhancing the longevity and integrity of the enclosure.
Mobility: The enclosure includes four rear wheel mounting points for 100 mm wheels, facilitating easier transport and setup.
Input/Output Flexibility: The parallel-wired speakON connectors offer flexibility for system wiring, allowing for easy linking of multiple Stasys X units. A positive signal to the + pin results in a forward cone movement, ensuring correct phase alignment.
Component Protection: Tough, kick-proof grills with foam filters are designed to protect the internal components from physical damage, reducing the need for frequent repairs.
Warranty: The Stasys X comes with a three-year warranty and guarantee, providing assurance of product quality and manufacturer support.
Precautions for Use: