VOILE Universal Splitboard Hardware - User Manual

Voilé Universal Splitboard Hardware Set-up Instructions
1 Puck Alignment Guide
4 Pucks
2 Parallel Slot Disks
2 In-line Slot Disks
4 Rubber Puck Gaskets
8 M6 x 12mm Pan-head Mounting Screws
8 T-nuts (6mm) for binding mounting
2 Slider Tracks
2 Slider Pins w/ Leashes
1
2
3
4
5
6
7
8
9
*
*
*
* Not Included with Voilé Universal Splitboard Hardware for Splitboard Bindings
Parts Included
* Hooks and Tip Clips not included
Voilé Manufacturing
2636 S. Constitution Blvd.
Salt Lake City, UT 84119
801-973-8622
2 Touring Brackets
2 Touring Bracket Pin Guides
6 M6 x 10mm Touring Bracket Screws
2 Dual Climbing Heel Pads
2 Climbing Heel Shims
2 55mm Climbing Wires
2 75mm Climbing Wires
4 M6 x 16mm Climbing Heels Screws
Scraper
10
11
12
13
14
15
16
17
18
1
2
2 2
2
3 3
4 4
5
5 5
5
6
6
7
8 8
9
10
10
11
11
12
12
13
13
14
14
15
15
16 16
17
18
1
voile.com
The Voilé Splitboard and Voilé Universal Splitboard Hardware provide a quick and reliable conversion
from uphill touring to downhill snowboarding without any sacrifice in performance, giving snowboarders
the easiest, most efficient access to the backcountry.

Summary

Touring Bracket Mount

Touring Bracket Installation

Mount the Touring Bracket and Pin Guide using M6 x 10 mm screws.

Important Screw Warning

Do not use M6 x 16mm screws to avoid base damage.

Climbing Heels Mount

Climbing Heel Assembly

Assemble climbing wires and heel pads onto the heel pad.

Climbing Heel Shim Importance

Climbing Heel Shim protects topsheet and supports binding in tour mode.

Disk Reference & Guide

Disk Orientation and Stance Adjustment

Adjust binding position using In-Line and Parallel Slot Disks with A/B marks.

Stance Width & Angles

Initial Stance Setup

Position pucks and alignment guide for front foot stance and angle.

Stance Width & Angles (continued)

Rear Foot Stance and Binding Mounting

Repeat stance setup for rear foot and slide binding onto pucks.

Mounting Binding to Slider Track

Slider Track Binding Attachment

Mount bindings to slider tracks using T-Nuts and screws, ensuring flush fit.

Binding Mounting Precautions

Ensure flush mounting to avoid warping tracks or hindering pivot.

VOILE Universal Splitboard Hardware Specifications

General

Brand	VOILE
Model	Universal Splitboard Hardware
Category	Sports & Outdoors
Language	English