Need help?Do you have a question about the VOKERA BeSMART and is the answer not in the manual?
General| Type | Smart Thermostat |
|---|---|
| Wi-Fi Connectivity | Yes |
| Mobile App | Yes |
| Temperature Range | 5°C to 35°C |
| Control via App | Yes |
| Display | LCD |
| Communication Protocol | Wi-Fi |
| Programmable | Yes |
| Boiler Control | Yes |
| Compatibility | VOKERA boilers |
| Power Supply | Battery |
| Features | energy monitoring |
Details the steps for installing a wired BeSMART thermostat.
Explains the wireless setup for the WiFi Box for main supply power.
Outlines the key steps for installing the BeSMART thermostat unit.
Provides instructions on how to remove the old thermostat device.
Verifies device compatibility and guides electrical connection procedures.
Detaches the BeSMART thermostat unit from its wall mounting plate.
Secures the BeSMART wall plate to the wall or electrical box using screws.
Connects room thermostat or zone valve wires to the BeSMART terminals.
Advises consulting the installer manual for detailed wiring specifications.
Instructs on correctly inserting AA batteries into the thermostat's compartment.
Guides on re-attaching the BeSMART thermostat to the wall plate after battery installation.
Guides on installing the wireless BeSMART thermostat.
Details the wired connection procedure for the WiFi Box.
Outlines the key steps for installing the wireless BeSMART unit.
Instruction to isolate any redundant wiring for the wireless setup.
Detaches the BeSMART thermostat unit from its wall mounting plate.
Secures the BeSMART wall plate to the wall or electrical box using screws.
Instructs on correctly inserting AA batteries into the thermostat's compartment.
Guides on re-attaching the BeSMART thermostat to the wall plate after battery installation.
Advice on placement to avoid draughts, heat, and direct sunlight for accuracy.
Verifying boiler compatibility and listing essential installation tools.
Crucial safety instruction to switch off electrical supply before starting installation.
Attaches the WiFi Box to the boiler casing using its magnetic pad.
Advises on optimal WiFi Box placement for good signal strength.
Connects the WiFi Box to a power source using the provided USB cable and adapter.
Connects the WiFi Box USB cable to the boiler's OTBus or TA connection.
Advises consulting the boiler installer manual for detailed connection specifics.
Re-attaches the WiFi Box to the boiler casing after making connections.
Guides on downloading and installing the BeSMART mobile application on a smartphone or tablet.
Instructs users to create a new user account by following app prompts.
Links the WiFi Box's unique ID to the created user account for device management.
Details the process for pairing RF thermostats or boiler receivers with the WiFi Box.
Identifies the transparent button on the WiFi Box used for initiating pairing sequences.
Ensures smartphones/tablets are connected to the target WiFi network for pairing.
Explains the Smart Link method for connecting the WiFi Box to the home network via the app.
Details the WPS method for connecting the WiFi Box to the home network, if supported by the router.
Explains the meaning of various LED combinations on the WiFi Box for status indication.
Provides a legend for understanding LED states like fixed, flashing fast, or flashing slow.
Describes the "Err" alarm indicating a damaged temperature sensor.
Explains the "E82" alarm related to RF issues, battery, or distance problems.
Describes the "E83" alarm for missing or failed OTBus connection.
Details the "E84" alarm for irreparable hardware issues with the device.
Covers "A01...99" alarms indicating specific boiler operational issues.
To Next Page