Important Precautions
Thank you for purchasing the VolantexRC Easy-Plug Brushless
ESC. This is a lightweight, high-quality, efficien t sensorless and
Easy programing brushless electronic speed control . This ESC
have advanced ‘auto-match’ features such as match automaticly
battery type , low voltage cutoff , timing etc. making this truly a
‘Easy-Plug’ ESC.
VolantexRC’s Easy-Plug ESC are designed for no-frill, quick and
easy plug to play for controlling brushless motors. All feature the
Safe-Start function, which prevents accidental propeller rotation
until the ESC is deliberately “armed”. NiCd, NiMH, and LiPo co-
mpatibility is also included and will be auto match , plus a high-
power battery eliminator circuit (BEC). A thermal protection syst-
em will automatically stop motor rotation if ESC temperatures
reach extreme levels , and a brake function can be manually
switched on or off.
Read and follow these precautions carefully
before use.
• NEVER use more than the specified voltage on the ESC input.
• ALWAYS
mount the ESC in a position where air can freely flow
across it during operation.
• ALWAYS turn on the transmitter before connecting the battery
to the ESC.
• ALWAYS
disconnect the battery from the ESC when not in use.
• ALWAYS remove the propeller from the motor when working
on the model!
• ALWAYS observe that a propeller might unexpectedly rotate
anytime that power is applied to the ESC , which could cause
severe injury! Never get near the propeller!!
• Make sure the input battery is fully charged before connecting
to the ESC , so the low voltage cutoff feature can function
1
To Next Page
Loading...
Need help?
General