To Next PageTo Next Page
Need help?Do you have a question about the Volkswagen 1T0 071 126 A and is the answer not in the manual?
General| Brand | Volkswagen |
|---|---|
| Model | 1T0 071 126 A |
| Category | Automobile Accessories |
| Language | English |
Emphasizes the importance of reading the manual before starting installation.
Advises checking and re-tightening fastenings after initial use and regularly.
States the maximum allowed roof load capacity is 100 kg.
Warns about altered vehicle height and the need to consider it during driving.
Advises against driving through car washes with roof bars fitted.
Details correct mounting, width limits, and load distribution for roof bars.
Recommends removing bars for other road users' safety when not in use.
Advises using specialist workshops and genuine VW parts for repairs.
Describes the identification stickers and their placement for correct mounting.
Details where bars can be fastened and how to remove/retain sealing plugs.
Explains the procedure for using the torque wrench for tightening bolts.
Guides on placing support feet onto the roof edge and initial tightening.
Specifies the torque setting (6 Nm) and method for tightening support bolts.
Instructions on how to attach accessories to the fitted roof bars.
Explains how to close the T-track slot with cover sections when bars are unused.
Advises removing roof bars to save fuel and prevent unnecessary wind resistance.
Highlights the need to follow local road traffic regulations for roof transport.
Provides the weight of the roof bar set and its technical details.
Details how to calculate the total allowed roof load including accessories.
Crucial warning against exceeding the vehicle's maximum roof load or gross weight.
Provides guidance on cleaning and maintaining the roof bars, especially in winter.
Instructions on how to re-order a lost torque wrench using a reference card.
