Connecting an external audio source via Bluetooth
®
Fig. 23 MEDIA main menu
First read and observe the safety warn-
ings on page 3 and the introductory
information on page
20.
In Bluetooth
®
audio mode, audio files from a Blue-
tooth
®
audio source (e.g. mobile telephone) that is
connected via Bluetooth
®
can be played over the
vehicle loudspeakers (Bluetooth
®
audio playback).
Conditions
● The Bluetooth
®
audio source must support
the A2DP
Bluetooth
®
profile.
● The
Bluetooth audio (A2DP/AVRCP)
function must
be activated in the Bluetooth setup menu
⇒ page 39
.
Starting Bluetooth
®
audio transfer
● Switch on Bluetooth
®
visibility on the external
Bluetooth
®
audio source (e.g. mobile telephone).
● Reduce the base volume on the infotainment
system.
● Press the
MEDIA
infotainment button.
● Touch the ⇒ Fig. 23
1
function button and se-
lect
BT
audio
.
● Touch the
Find devices
function button to con-
nect an external Bluetooth
®
audio source for the
first time.
● OR: touch the
Paired devices
function button to
select an external Bluetooth
®
audio source from
the list.
● Continue the process by following the prompts
on the infotainment system screen and in the dis-
play on the Bluetooth
®
audio source.
You may then have to start playback on the Blue-
tooth
®
audio source manually.
When playback on the Bluetooth
®
audio source is
stopped, the infotainment system remains in Blue-
tooth
®
audio mode.
Controlling playback
The extent to which the Bluetooth
®
audio source
can be controlled via the infotainment system var-
ies depending on what Bluetooth
®
audio source is
connected.
With media players that support the AVRCP Blue-
tooth
®
profile, playback on the Bluetooth
®
audio
source can be automatically started or stopped
when the unit is switched to Bluetooth
®
audio
mode or to a different audio source. In addition,
track display or track change is possible via the in-
fotainment system.
Due to the large number of possible Blue-
tooth
®
audio sources, it is not possible to
guarantee fault-free operation of all described
functions.
Always switch off the warning and service
tones on a connected Bluetooth
®
audio
source, e.g. key tones on a mobile telephone, to
prevent interference noise and malfunctions.
Media settings
First read and observe the safety warn-
ings on page 3 and the introductory
information on page
20.
● Select the MEDIA
main menu by pressing the
MEDIA
infotainment button.
● Touch the
function button to open the Media
setup menu.
Function button: effect
Remove the SD card safely
: memory card is ejected from the system and can then be safely removed
⇒ page 26
.
Sound
: sound settings ⇒
page 42.
Bluetooth
: opens the Bluetooth setup
menu ⇒ page 39.
Composition Touch, Composition Colour28
To Next Page
Loading...
