VOLO Grasper User Manual

Grasper
X1
Upper ring
Lower ring
M3 Allen Key
X1
M4 Allen Key
X1
Spacer
X2
Spacer
X2
MATCHING BAR DIAMETER:
23.5~27 mm (with ΦA 25.4 mm spacer)
30~34.5 mm (with ΦA 31.8mm spacer)
Net Weight:80g
Color:
TM
PRODUCT FORMATION
FITMENT CHECK
Phone:+86 755 29558017
Fax:+86 755 22631887
E-mail @volo.hk:info
VOLO BIKE PRODUCTS INC
http://www.volo.hk
X1

VOLO Grasper Specifications

General

Brand	VOLO
Model	Grasper
Category	Bicycle Accessories
Language	English

Summary

Product Formation and Fitment

Matching Bar Diameter Specifications

Details the compatible handlebar diameters with specific spacers for mounting.

Handlebar Mounting Instructions

Spacer Selection for Handlebar

Choose the correct size "Spacers" based on handlebar diameter for proper fitment.

Secure Ring Attachment

Tighten the "Upper ring" and "Lower ring" together to ensure a secure lock onto the handlebar.

Attach Grasper Unit

Screw the "Grasper" into the assembled rings from the top using the M3 Allen Key.

Mount Phone and Adjust Grip

Place your phone into the "Grasper" and adjust the tightness by rotating the knob.

Stem Mounting Instructions

Prepare Stem Cap

Loosen the screw of the stem cap and remove it before mounting.

Mount Grasper on Headset

Mount the "Grasper" onto the headset cap using the M4 Allen Key and M6 screws.

Secure Phone and Adjust

Place your phone into the "Grasper" and adjust its tightness by rotating the knob.

Important Warnings and Specifications

Product Safety and Usage Guidelines

Details material, magnetic force, phone size compatibility, weight limits, and recommended usage conditions.