EasyManua.ls Logo

VOLTAG NN-713520SG Series - User Manual

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.ridevoltag.com
User Manual
Electric Assist Bicycle
NN-713520SG
Please read this manual carefully before assembling or operating.
MANN-713520SG-01
2021-11-23
Series

Questions and Answers

  • S
    suttondylanAug 5, 2025
    What to do if my VOLTAG NN-713520SG Bicycle battery cannot be charged?
    • C
      Cody CordovaAug 5, 2025
      If the VOLTAG Bicycle battery isn't charging, first ensure the charger is properly connected to both the wall outlet and the bike. If the connections are secure, try recharging the battery. If the problem persists, the battery may be old or damaged and require replacement.
  • N
    novakmarieAug 10, 2025
    Why is it hard to pedal my VOLTAG Bicycle?
    • L
      Lauren ShannonAug 10, 2025
      If it's hard to pedal your VOLTAG Bicycle, several factors could be the cause. The flywheel might be damaged or not lubricated, so try cleaning and lubricating it. The chain could be too tight, so moderately adjust its tightness. The brake pads might be rubbing against the rotor, requiring brake tension adjustment. Low tire pressure can also make pedaling difficult, so inflate the tires. Finally, the transmission parts might need lubrication, so clean and lubricate them.
  • L
    Lisa GomezAug 14, 2025
    Why has the max mileage reduced on my VOLTAG Bicycle?
    • J
      Justin DavisAug 15, 2025
      If the maximum mileage of your VOLTAG Bicycle has reduced, it could be due to several reasons. The brake system might be locked or rubbing, or the chain might be too tight or lacking oil, so adjust the brake lever or add oil to the chain. Too much oil on the freewheel can also cause this issue, so clean the freewheel. Another possibility is that the freewheel bearing is too tight, so adjust the bearing of the freewheel.
  • E
    Emily MooreAug 20, 2025
    What does it mean when the power indicator on my VOLTAG Bicycle flashes?
    • E
      Erik CruzAug 20, 2025
      If the power indicator on the display of your VOLTAG Bicycle is flashing, it indicates that the battery voltage is low. Charge the bike immediately.
  • B
    barnesalexanderAug 25, 2025
    What to do if the saddle on my VOLTAG Bicycle is moving?
    • M
      melinda10Aug 26, 2025
      If the saddle on your VOLTAG Bicycle is moving up and down or side to side, it's likely that the saddle is unclamped or the nuts are loose. Adjust or tighten the saddle and tighten the clamp screw. Also, check if the screw or nut under the saddle is loose and tighten it if necessary.
  • P
    Phillip HinesAug 30, 2025
    Why is the front wheel shifting on my VOLTAG Bicycle?
    • L
      Laura PageAug 30, 2025
      If the front wheel of your VOLTAG Bicycle is shifting or shaking, the screw nut on the front axle may be loose. Tighten the nut on the front axle.

Summary

NN-713520 SG Introduction

NN-713520 SG Specifications

Product Diagram

Display

Display Operation

Throttle Operation

Explains the function of the handlebar throttle and its speed-dependent activation.

Handlebar Assembly

Pedal Assembly

Adjusting the brakes

Dual Battery Power Switch

Bluetooth connection method

Steps for connecting a phone or tablet to the bike's Bluetooth speaker.

Warning and Caution Statements

General Safety

Maintenance

Lubricating parts

Details the schedule and types of lubricants for various bike components.

Cleaning your bike

Provides instructions on how to clean the e-bike safely and effectively.

Maintaining your E-bike battery

Offers guidance on proper battery care, charging, and storage.

Charging Your Bike

Low battery flash

Describes how the battery indicator signals a low charge level.

Charging Your Battery

Step-by-step guide to connecting the charger and charging the battery.

Troubleshooting

VOLTAG NN-713520SG Series Specifications

General IconGeneral
BrandVOLTAG
ModelNN-713520SG Series
CategoryBicycle
LanguageEnglish

Related product manuals