EasyManuals Logo

VOLTCRAFT BS-19+ USB-ENDOSKOP User Manual

VOLTCRAFT BS-19+ USB-ENDOSKOP
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
G
MAINTENANCE AND CARE
The product is maintenance-free. The product contains no parts that require servicing.
Therefore, do not open it.
Use a clean, dry and soft cloth for cleaning. If the device is very dirty, use a cloth to slightly
moisten it with lukewarm tap water.
Clean the product very carefully; otherwise you may scratch it.
Do not use abrasive cleaning agents, rubbing alcohol or other chemical solutions,
which may damage the casing or even impair operation.
DISPOSAL
The product must not be disposed of in household waste!
Dispose of the waste product in accordance with the applicable legal regulations.
TECHNICAL DATA
Operating voltage .................................5 V/DC
Power supply ........................................via USB
Power consumption ..............................max. 400 mA
Connection ...........................................USB plug; USB2.0, USB1.1
Sensor ..................................................1/10”
Camera angle .......................................50° to 61.4°
Resolution .............................................max. 640 x 480 pixels (VGA)
Frame rate ............................................30 FPS
Image format ........................................JPG
Video format .........................................AVI
Camera lighting ....................................6 LEDs (dimmable)
Focus .................................................... 30 up to 80 mm
Supported operating systems ............... Windows
®
XP SP1 or higher (only 32 bit); Windows
Vista
TM
, Windows
®
7, Windows
®
8, Windows
®
8.1,
Windows
®
10 (32 and 64 bit)
Dimensions (W x H x D) .......................approx. 40 x 200 x 40 mm
Length of gooseneck ............................approx. 830 mm ±10 mm
Gooseneck diameter ............................4.8 mm ±1 mm
Camera diameter .................................. 6,0 mm ±0.1 mm
Bending radius ......................................max. 50 mm (gooseneck)
Length of USB cable .............................approx. 2000 mm ±50 mm
Weight ..................................................approx. 170 g
Operating conditions .............................0 °C to +50 °C; 10% to 90% relative humidity
Storage conditions ................................ -20 °C to +70 °C; 5% to 90% relative humidity

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VOLTCRAFT BS-19+ USB-ENDOSKOP and is the answer not in the manual?

VOLTCRAFT BS-19+ USB-ENDOSKOP Specifications

General IconGeneral
BrandVOLTCRAFT
ModelBS-19+ USB-ENDOSKOP
CategoryHeadlamp
LanguageEnglish