VOLTECH AT3600 USER MANUAL TEST RESULTS HANDLING
3. TEST RESULTS HANDLING
3.1. RECEIVING TEST RESULTS
By default, the AT series tester does not automatically send test results back to the
server. Results will only be sent back for test programs that have been set up with the
‘Send Results to Server’ option enabled (see chapter 2, section 2.3.1).
The server receives test results from the tester via the same serial connection used for
transferring test programs to the tester. Results handling is a separate function of the
server program, and is not part of program transfer. Where more than one tester is
connected to your server PC, the one server program handles all the transformer
tester results as well as acting as the central server.
All results sent by one tester's channel during one day, are collected together and
formed into one large file. This file is known as the batch results file.
One batch results file will be generated per open channel, per day. Batch files are
stored under the specified results directory; see chapter 2, section 2.2.6.
The DOS filename of the batch results file is generated as follows;
c<n><dd><mm><yy>.atr
where:
n channel number
dd day number
mm month number
yy year number
example:
c1250297.atr (Channel 1, 25-02-1997)
‘atr’ is the reserved file extension used by the server to indicate a stored test result
file.
UING THE SERVER VPN 98 - 024 PAGE 4.3.1.
To Next Page
Loading...