DESCRIPTION OF THE FIXTURE SYSTEM VOLTECH AT3600 USER MANUAL
To hold the drilling templates in place for drilling, clips are provided to hold the
drilling templates in place. They clip into holes provided at the corners of the
interface plate and the probe housing box.
You can also make use of the free area behind the fixture, allowing you to mount
other clamps, handling accessories, ink jet spray printers or even a scanning bar code
reader close to the point of test.
ASSEMBLY AND WIRING
i
A comprehensive guide to the construction of your own custom fixtures is
supplied with each custom fixture plate kit (see section 2.2 of this chapter).
PAGE 5.2.6. VPN 98 - 024 V07 FIXTURES
To Next Page
Loading...