VOLTECH AT3600 USER MANUAL EXECUTE MODE
Note that pressing the ABORT soft-key will also take you back to the RUN-FINISH
display, but with no serial number having been entered. This would be the correct
action if the next soft-key you wish to press is FINISH. (subsequently pressing RUN
would merely return you to the ‘Enter the serial number’ display.)
3. RE-INPUTTING THE OPTIONS
When options are enabled, the SETTINGS soft-key on the RUN-FINISH display
enables you to change program options such as compensation, batch number or
operator name without having to re-enter the test program name.
To change the batch number, for example, at the RUN-FINISH display, press
SETTINGS, then NEW BATCH:
To change the operator name, press the OPERATOR soft-key.
FRONT PANEL OPERATION VPN 98 - 024 PAGE 6.3.11.
To Next Page
Loading...