PROGRAM MODE VOLTECH AT3600 USER MANUAL
6.1 SET UP
Pressing the soft-key SET-UP at the ‘Program Mode’ display above will reveal:
This display is the start of a list of options under the title ‘Set-Up’.
To modify an option:
• Press the cursor soft-keys ( ↑ and ↓ which appear in context) to scroll up and
down the list, so that the option you wish to modify is positioned on the third line
(‘Fail Beeper’ in the above example).
• For most options, press the third soft-key to cycle round the available settings for
that option. In the example of ‘Fail Beeper’, this will be:
The full list of options is shown below:
Fail Beeper SHORT CONTINUOUS OFF
Pass Beeper SHORT OFF
Key Response CLICK BEEP
Beeper Volume CHANGE
Display Contrast CHANGE
Clock: yyyy mmm dd hh:mm +
Program Store SERVER INTERNAL
PAGE 6.6.2. VPN 98 - 024 FRONT PANEL OPERATION
To Next Page
Loading...