VOLTECH AT3600 USER MANUAL INSTALLING THE TESTER
2. INSTALLING THE AT3600 TESTER
2.1. PACKAGE CONTENTS
The following items are supplied in the packing case along with this manual:
1. AT3600 transformer tester.
2. Power cord.
3. CD-ROM inside the cover of this manual, which contains the Editor and Server
installation files and other important information.
4. 9pin’D’ – 9pin’D’ F-F Cable.
5. 9pin’D’ – 25pin’D’ F-F Cable.
6. 25pin’D’ – 25pin’D’ F-F Cable.
7. This AT3600 user manual.
8. Calibration certificate.
9. A Voltech product registration card.
Please report any missing items to your Voltech supplier.
Returning your product registration card will ensure that you continue to receive the
latest product and application information.
2.2. INSTALLING THE TESTER
• Place the tester on a suitable work surface in the position where it is to be used.
Before deciding on the exact location, it may be useful to refer to Chapter 10 of
this manual which describes a safety system to protect operators from the high
voltages which may be present on the components under test.
• Connect the tester's auxiliary port to a spare COM port on the PC as shown.
GETTING STARTED VPN 98 - 024 PAGE 2.2.1.
To Next Page
Loading...