SAFETY SYSTEMS VOLTECH AT3600 USER MANUAL
PAGE 10.12. VPN 98 - 024 SAFETY SYSTEMS
(b)
(c)
(d)
There is no way that the measurement can be recovered from this point. For program
execution, this means that the entire program has to be re-run from the first test; and for
measure mode, the test has to be re-entered. In the case of fixture compensation, either
the compensation for the entire program must be re-run, or (in measure mode) the
compensation for the required test.
Note that during the normal operation of changing transformers, the indicator on the
slave column can show a red light. This merely indicates that the light curtain has been
broken; it should automatically reset and return to the green indicator when the operator
removes their hand.
When program execution has finished, and the front panel LED changes to either red
(fail) or green (pass), then it is safe for the operator to change to the next transformer to
be tested.
To Next Page
Loading...