QUICK START TUTORIAL VOLTECH AT3600 USER MANUAL
PAGE 2.3.8 VPN 98 - 024 GETTING STARTED
The "User Offset Enabled" check box has the same function as before but in units of
turns ratio.
Click on the ‘OK’ button. Again the test and its parameters will appear in the
‘Program’ window.
The lower left window should now contain the complete program. The scroll bars in
this window enable you to view each test in the program in turn to check that it is
correct.
The editor will not allow a program to be run in
the AT unless it has previously been saved:
From the top level
menu bar, select
Part >
Save As
At the dialogue box,
type in
TUTORIAL
as the part name
Click on the OK button
to close the dialogue box and save the test program in the editor default directory.
To Next Page
Loading...