VOLTECH AT3600 USER MANUAL QUICK START TUTORIAL
GETTING STARTED VPN 98 - 024 PAGE 2.3.19.
2.3.4 ADDITIONAL TOPICS TO INVESTIGATE
1. STORING PROGRAMS INSIDE THE TESTER
The AT3600 contains memory for the storage of test programs. The programs are
stored even when the tester is switched off. Once a program is stored, the tester may
be used without PC editor or server software.
To operate the tester in this way, the origin of the tester’s programs must be set to the
local program store.
• On the tester, at the ‘Program mode’ display, under the soft-key SET-UP, change
the ‘Origin’ to ‘LOCAL’.
This is described in section 2.3.3
WORKING WITHOUT A SERVER
A single program may be stored in
the AT3600 using the PC editor.
Once a program has been entered
using the editor and downloaded to
the tester,
The tester will display:
Press LOCAL SAVE and the program that has been downloaded from the PC editor
will be saved in the tester’s local program store. Note that any programs previously
stored in the tester will be lost.
All PC connections to the tester may be now be removed.
i
To Next Page
Loading...