QUICK START TUTORIAL VOLTECH AT3600 USER MANUAL
PAGE 2.3.20 VPN 98 - 024 GETTING STARTED
To run the program at any time, return the tester to the top level display, press
EXECUTE at the top level display:
Then press LIST to choose the program and press the RUN key and continue as
before.
GROUP DOWNLOAD USING THE SERVER
Rather than deal simply with individual programs, the server is able to create program
groups. A group of programs can be downloaded to a tester which can then use
individual programs using its local facilities.
Having executed programs loaded from the Server connected to the tester, you may
wish to download a group of programs so that the tester may be used in a stand-alone
situation:
• Use the Server menus to create a named group of programs. (It is possible to
create a group containing only the program TUTORIAL created above.)
• Ensure that the Server is still running and connected to the tester as above.
• On the tester, at the ‘Program mode’ display, use the soft-key PROGRAMS, and
enter the name of the group to be downloaded.
• At this point, unless you wish to archive measured results on the Server, the
Server connection may be removed.
• At the tester’s Top-Level display, press EXECUTE, and enter the name of a
program in the group, and continue as normal.
2. RESULTS ANALYSIS
You may wish to use another application for further analysis of test results sent back
to the Server:
• Close down the Server so that you may have full access to the results file
The results will be stored in the directory chosen for results when the Server was
installed (see page 2.2.6), in a file with a name similar to
C2311096.ATR
where the ‘C2311096’ is a coded version of the date, and ‘.ATR’ is the file
extension used by the Server for results files.
• As an example, use the procedure outlined on page 4.3.13. to import the results
into an Excel spreadsheet.
To Next Page
Loading...
