Voltech AT3600 - 2. Schematic Editing

VOLTECH AT3600 USER MANUAL SCHEMATIC EDITING
2. SCHEMATIC EDITING
The Voltech AT series schematic editor allows you to recreate the configuration of
the transformer on the fixture as a schematic diagram on the screen. Using the
schematic as a visual reference, you may create your test program.
This chapter describes how to create a transformer schematic using the AT series
schematic editor.
This chapter covers the following operations:
How To:
• Create or add a transformer winding
• Connect the winding terminals to test nodes
• Delete a winding
• Rename a terminal
• Add a terminal
• Delete a terminal
• Add a core connection
• Delete a core connection
• Add a screen connection
• Delete a screen connection
TEST PROGRAM EDITOR VPN 98 – 024 PAGE 3.2.1