VOLTECH AT3600 USER MANUAL SCHEMATIC EDITING
2.6. DELETING A TERMINAL FROM AN EXISTING WINDING
To remove a terminal from a transformer winding:
1. Select the terminal which you would like to be removed by using the mouse
pointer and clicking the left mouse button once.
2. Choose ‘Delete Winding’ from the ‘Schematic’ menu on the menu bar.
The bottom terminal of the winding will be removed from the screen, together with
any connections to that terminal which are present.
2.7. ADDING A CORE CONNECTION
To add a core connection:
1. Choose ‘Add Core Connection’ from the ‘Schematic’ menu.
A connection from the core will appear on the screen. You may now add a core-to-
node connection.
TEST PROGRAM EDITOR VPN 98 – 024 PAGE 3.2.5
To Next Page
Loading...
