SCHEMATIC EDITING VOLTECH AT3600 USER MANUAL
You may change a name by:
1. Selecting the appropriate terminal box with the mouse, or by moving between the
boxes with the TAB key on the keyboard and then typing the new name.
2. Pressing ENTER or clicking the mouse pointer on OK
The dialogue box will be removed and the corrections will be displayed on the screen.
2.5. ADDING A TERMINAL TO AN EXISTING WINDING
To add a terminal to a transformer winding:
1. Select ‘Add Winding’ from the ‘Schematic’ menu on the menu bar to create a
second two terminal winding.
2. Now place the new winding on the same side of the schematic as the winding
which requires the additional terminal.
Upon clicking the left mouse button, a form fill-in dialogue box will appear on the
screen with prompts to insert the terminal names of the new winding.
3. Name the terminals of the second winding, giving one terminal the same name as
a terminal of the previous winding.
4. Press ENTER or click on OK.
The dialogue box will be removed, and the schematic will show the two windings
joined at the common terminal.
PAGE 3.2.4. VPN 98 - 024 TEST PROGRAM EDITOR
To Next Page
Loading...