VOLTECH AT3600 USER MANUAL SCHEMATIC EDITING
To change a connection, simply use the right button to pick it up and move it to either
another test node or to another transformer terminal.
To delete a connection, again use the right mouse button to pick up the connection,
but this time release it when it is not over either a node or a terminal.
2.3. DELETING A WINDING
To delete a winding:
1. Select a winding by pointing at it with the mouse pointer and clicking the left
mouse button once. A selected winding will be indicated by a box surrounding
the winding.
2. Choose ‘Delete Winding’ from the ‘Schematic’ menu.
The selection will be removed from the screen.
2.4. RENAMING A TERMINAL
To rename a terminal either:
1. Select the winding containing the terminal to rename by using the mouse pointer
and clicking the left mouse button.
2. Choose ‘Rename Terminals’ from the ‘Schematic’ menu.
OR
MOUSE SHORTCUT: Double-click on the chosen winding.
A fill in dialogue box will appear. Each fill-in box will contain the current names of
the winding terminals.
TEST PROGRAM EDITOR VPN 98 – 024 PAGE 3.2.3
To Next Page
Loading...
