CREATING THE PROGRAM VOLTECH AT3600 USER MANUAL
PAGE 3.3.6. VPN 98 - 024 TEST PROGRAM EDITOR
File except those for the final execution run, i.e. the one that produces the pass or fail
front panel display.
If you wish to see the measured results from each retry in your Server Results File,
then you should enable the program option ‘Send Retry Results to Server’ when the
program is created in the Editor. This option could provide data, for example, which
allows you to improve your production process and yield.
Notes:
1. The third line showing the graphical comparison of the measured value and user
programmable limits has a logarithmic scale. The measured value may be
represented by either a vertical bar (as shown) when it lies within the range that
can be displayed on the LCD, or by an arrowhead (< or >) at the end of the
horizontal bar when it lies outside the range that can be displayed on the LCD.
2. Should the tester be returning results to a PC running the editor software, then the
editor software will ‘freeze’ when this screen is displayed until the appropriate
softkey (Re-run, Continue or Abort) is pressed.
To Next Page
Loading...