VOLTECH AT3600 USER MANUAL CREATING THE PROGRAM
TES PROGRAM EDITOR VPN 98 - 024 PAGE 3.3.7.
3.2. PROGRAM EDIT
After you have created the program schematic, and selected the program options, you
may then start creating the actual program of tests.
To edit the test program, you must first switch to the Program Editor.
From the Top Level menu bar, select:
Program > Edit
You will now see a display
with three separate
windows:
Top Left: A simplified view of the transformer schematic omitting the wiring to
the nodes.
This is a passive window intended to be used as a memory aid; it
cannot be used to change the schematic. (If you need to alter the
schematic at any time, simply click on ‘Schematic’ then 'Edit' in the
Top Level menu.)
To Next Page
Loading...