I. Introduction
Welcome to use this product.
VOLTH S-32 adopts high-performance MCU processor,it is Great Value as has high
reliability,security, automatically setting range funcition,hand-held clamp meter etc.. the
product has a large digital display, full range overload protection, data-hold function,
undervoltage indication, auto shut off function, it has TRUE RMS measurement function
which can accurately measure frequency voltage, non-sinusoidal voltage and inrush
current measurement function which can measure inrush current about 80mS RMS, the
instrument is suitable for frequency-converting power supply, motor performance test, The
function to measure DC current range up to AC and DC 600A, which is widely used in
electroplating, DC welding machine, motor vehical test and all kinds of DC 500mA current
measurement. It is more excellent for a new generation of practical electrical measuring
instrument.
This product is ideal instrument for test, maintenance and repais in college, smelting,
communications, manufacturing, petroleum, electric power, national defense,electronic,
electric power equipment .
II. Safety standard
The meter in structure complies with the safety requirements of ICE61010-1. Read the
instruction carefully as follows before you use the meter:
1. When measuring voltage, AC or DC voltage should not be more than the peak voltage
(DC / AC 600V) of the meter.
2. Voltage of less than 36V is safety voltage. When the voltage is more than DC 51V or
AC36V, the leads should be checked. The test lead should be connected correctly and
their insulating property should be under excellent status against electric shock.
3. When change of functional measuring range, the test lead should be away from test
point.
4. It is suggested that for safety the functions and range should be selected correctly
although protective function for the full measuring range exists.
5. When measurement of current, the input current shouldn’t be more than the maximum
current labeled on input end.
6. Safety symbols:
Warning! risk of high voltage and electric shock! Double insulated.
III. Features
3.1 General
3.1.1The meter is based on CMOS large scale IC and can automatically changed
measuring range for measurement of AC/DC voltage, AC, resistance, frequency and
capacity, which makes the meter easy to be used.
3.1.2 Display mode: Display by LCD.
3.1.3 Maximum display: 3999
3.1.4 Maximum span of jaw: 30mm.
1.
To Next Page
Loading...