EasyManua.ls Logo

Volvo Penta AD31P User Manual

Volvo Penta AD31P
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION BOOK
AD31, TMD31, TAMD31
D41, AD41, TMD41, TAMD41
TAMD42/WJ, KAD42, KAMD42
Question and Answer IconNeed help?

Do you have a question about the Volvo Penta AD31P and is the answer not in the manual?

Volvo Penta AD31P Specifications

General IconGeneral
Engine TypeDiesel
Number of Cylinders4
Displacement2.4 L (146 cu in)
Fuel SystemDirect injection
Cooling SystemFreshwater with heat exchanger
TypeDiesel
Cylinders4
Max RPM3800 rpm
Power Output150 hp
Power150 hp
Bore92 mm
Stroke90 mm
Max Power150 hp

Summary

Safety Precautions

Introduction to Safety

Provides essential information for correct engine operation and safety.

Important Warnings and Precautions

Highlights crucial safety symbols and general precautions for operating and servicing the engine.

General Information

Spare Parts Warning

Warns about using non-original spare parts and potential risks.

Engine Parts

Instruments

Main Instrument Panel and Controls

Describes the gauges and controls on the main and auxiliary instrument panels.

Control Units

Single Lever Control Operation

Explains the function of the single lever control for forward, neutral, and reverse.

Trim Instruments

Driving

Starting the Engine and Initial Checks

Outlines the steps for starting the engine and essential pre-operation checks.

Power Trim for Optimal Performance

Explains how to use Power Trim to adjust boat trim for comfort and economy.

Driving Maneuvers

Driving Precautions

Lift Range Operation Warning

Warns against running the engine in the lift range and importance of drive alignment.

General Information, Engine

Emergency Stop and After-Use Procedures

Details emergency stopping and post-operation procedures for the engine.

Regular Maintenance

Daily Inspection: Oil and Coolant Levels

Details daily checks for engine oil and coolant levels, with safety warnings.

14-Day Checks: Reverse Gear Oil

Describes the procedure for checking the oil level in the reverse gear every 14 days.

Regular Maintenance (Continued)

Regular Maintenance (Continued)

100-Hour Checks: Engine Oil and Filter

Details the procedure for changing engine oil and the oil filter.

Reverse Gear Oil Change

Outlines the process for changing the oil in the reverse gear.

Regular Maintenance (Continued)

Regular Maintenance (Continued)

Drive Oil Change

Provides instructions for changing the oil in the drive unit.

Maintenance Instructions for DP Drive Installations in Commercial Use

Laying-up

Winter Laying-Up Procedures

Provides instructions for preparing the boat and engine for winter storage.

Seawater and Freshwater System Preparation

Details procedures for flushing and protecting the cooling systems for storage.

Other Tasks

Storage Launching Procedures

Outlines tasks for bringing the boat out of storage and launching it.

Fitting Propellers

DP Propeller Installation

Explains the step-by-step process for fitting propellers on DP drives.

DPX Propeller Installation

Details the procedure for installing propellers on DPX drives, including torque specifications.

Troubleshooting

Engine Troubleshooting Chart

Provides a chart to diagnose and identify the causes of engine starting or running problems.

Technical Data

Related product manuals