Volvo Penta AQ145B User Manual

11
9. AQ145. Remove the cooling water pipes between
the seawater pump and the heat exchanger and
between the heat exchanger and the oil cooler.
(Between the heat exchanger and the exhaust
pipe on AQ125.)
10. Remove the remaining three screws (X) on the
heat exchanger and draw it to one side from the
circulation pump.
11. Remove the cooling water pipe between the oil
cooler and the exhaust pipe. Not on AQ125. Then
remove the exhaust pipe.
12. Unscrew the oil filter. Use tool 999 2903 or push a
screwdriver through the filter and work it loose.
NOTE! Be careful not to spill oil.

Volvo Penta AQ145B Specifications

General

Engine Type	In-line 4-cylinder
Cylinders	4
Fuel Type	Gasoline
Compression Ratio	9.5:1
Fuel System	Single carburetor
Power Output	145 hp (108 kW)