Removing Instruments
Turn to the Remove menu and press
.
Turn to the instrument that is to be removed and con-
firm with
.
Changing Instruments
Turn to the Modify menu and press
.
Select the instrument that is to be changed and press
.
Choose between:
Remove, removes the instrument.
Replace, changes one instrument for another. Turn
to the desired instrument and press
.
Analogue/Numeric, specify whether the instru-
ment will be displayed as analog or digital.
Engine
Information concerning the engine and its transmission
is displayed in this view.
Depending on the functions installed in the boat, the
following can be displayed:
•
Engine Speed
•
Power Trim Angle, for further information refer to
trim control information throughout the book and
PTA Calibration in this chapter.
•
Rudder Angle
•
Coolant Temperature
•
Voltage, battery voltage
•
Engine Oil Pressure
•
Turbo Pressure
•
Engine Hours, total operating hours.
•
Transmission Oil Pressure
•
Transmission Oil Temperature
The information in this view cannot be changed.
Instruments and Controls
47701898 12-2010 29
To Next Page
Loading...
