To Next PageTo Next Page
Need help?Do you have a question about the Volvo Penta QL Boat trim system and is the answer not in the manual?
General| Type | Boat Trim System |
|---|---|
| Manufacturer | Volvo Penta |
| Model | QL |
| Voltage | 12V |
| Material | Composite |
| Compatibility | Volvo Penta sterndrives and outdrives |
| Function | Adjusts the trim angle of the boat for optimal performance |
| Control | Electronic control panel |
Details about the control panel, its buttons, and LEDs.
Information on the control unit's versions and operating temperature.
Crucial safety warning about bilge ventilation and gas fumes during drilling.
A critical warning against applying sealant below the interceptor gasket.
Warning to use only specified sealants and avoid hard caulk types.
Important note for EVC EC engines regarding connection of the red cable to the start key.
Details the calibration procedure for the trim system after installation.
Crucial advice to check for water leakage after launching the boat.
Explains error codes communicated via LED flashing and their remedies.
Guidance on regular checks for water intrusion and marine growth.
Instructions on cleaning moving parts and applying anti-fouling paint.
