Steering System Fault Messages
51657
If a malfunction in the steering system is discovered,
a steering specific pop-up will appear in the tachome-
ter or system display. The audible warning may also
sound. If installed, a relevant warning lamp will start to
flash on the alarm panel.
The pop-up displayed at left is a sample of what you
may see. The screen may cycle between several mes-
sages. The up and down arrows in the image at left
indicate that the screen is cycling between two distinct
messages.
For a list of steering system fault messages, please
refer to the chapter entitled Fault Code Register.
Acknowledging Steering Related Alarms
If the system discovers a fault, the word Fault(s) is
displayed on the screen. To see what faults have been
detected, press OK on the Info Display Panel. Use the
scroll buttons to move through the list if more than one
fault exists.
Alarms may also be acknowledged, but not viewed, on
the docking station panel. To acknowledge a fault,
press the
button.
For further information on how to handle fault mes-
sages and recommended actions, refer to the chapter
entitled Fault Code Register.
Operation
47701898 12-2010 83
To Next Page
Loading...
