Need help?Do you have a question about the Volvo 1324 and is the answer not in the manual?
General| Brand | Volvo |
|---|---|
| Model | 1324 |
| Category | Automobile Accessories |
| Language | English |
Instrument with analogue vehicle speed pointer and digital counters.
Modular system component in DIN radio compartment format.
Provides real-time pulses and encoded data for distance and speed recording.
Used for recording driver and vehicle data.
Explains symbols and provides notes for chart handling and device operation.
Information on legal regulations concerning device modification and potential violations.
Keys for unlocking the drawer and adjusting time group for driver 1.
Keys for driver 2 time group, functions, time adjustment, and error messages.
Shows date, time, odometer, driver time groups, and potential error signals.
Describes chart carrier, separating plate, nameplate, and hinged drawer.
Procedure for opening the drawer under specific conditions (standstill, ignition on).
Steps to insert the driver 2 chart correctly into the chart carrier.
Steps to insert the driver 1 chart correctly into the chart carrier.
Instructions for single driver operation, including display notes.
Information on time adjustment, daylight saving, and error indications on the display.
Procedure for setting time groups for driver 1 and driver 2.
Key for understanding symbols representing driving, other working, availability, and rest times.
Procedure if the drawer does not lock correctly after closing due to ignition off.
Automatic recording of time group 'I' when drawer is closed for over 25 hours.
Recommendation to remove charts during long vehicle standstill for maintenance.
Procedure when driver 1 and driver 2 swap roles.
Steps when a driver takes their chart and a new driver is inserted or both leave.
Instruction to set driver 2 time group to break time to avoid error messages.
Conditions for selecting TIME ADJUSTMENT function (vehicle stationary) and automatic synchronization.
Step-by-step guide to adjust minutes and hours using the device keys.
Indicates error symbol and flashing time if adjustment is done with chart inserted.
Details on how messages and failures are indicated on the display and instrument.
Procedure to access and view stored error messages and codes.
Table detailing displayed messages, their codes, and corresponding meanings or actions.
Guidance on handling recurring messages, troubleshooting, and updating chart carrier settings.
Guidelines for selecting and verifying tachograph charts based on full-scale value and approval marks.
Explanation of various recordings on the front of the tachograph chart.
Information on precise evaluation of recorded data and where to get details.
Details on manual entries required in the chart's centre field before and after a trip.
Explanation of entry fields for time groups, centre field, approval marks, and RPM recording.
How power loss is recorded on the chart with a line indicator.
Indication of sensor disconnection and device recording mechanism errors on the chart.
Obligation for regular inspection and testing of the tachograph.
Instructions for cleaning the device housing, display, and keys.
To Next Page
