12 Messages
The tachograph 1324 monitors the function-
ing of the system and automatically signals
any failure occurring in one of the compo-
nents, the device or the handling. Messages
and notes may be shown in the display imme-
diately after having closed the drawer or
when the failure occurs.
A message is being displayed
The function monitor (1) at the indi-
cating instrument is lit up,
an exclamation mark (2) will appear next
to the total kilometre reading in the
tachograph 1324 display and ...
depending on the error type either the
complete time display (3) is flashing or
the colon between the digits may stop to
flash.
Additionally, the error is recorded in an
electronical memory, see "Displaying
the error memory".
Some failures are also documented by
the tachograph 1324 on the chart,
see page 20.
1
2
3
To Next Page
Loading...
Need help?
General
