*
02
* Option/accessory, for more information, see Introduction.
85
Programming individual buttons
To reprogram an individual HomeLink
button,
proceed as follows:
1.
Depress the required button and do not
release.
2.
When the indicator lamp on HomeLink
starts to flash, after approx. 20 seconds,
start with step 1 in section "Programming
HomeLink®" on page 83.
For more information or to leave comments
about HomeLink
, visit: www.homelink.com or
ring 00 8000 466 354 65 (or premium rate
phone number +49 6838 907 277).
To Next Page
Loading...
