23
Fuel tank filling and filtration
The large fuel inlet is located on the rear of the engine
hood with large and accessible entry. It features a strainer
and water separator to ensure optimum fuel filtration and
preserve the engine’s life.
Customer Benefit
More productivity.
Low operating and maintenance costs. 054
•
•
Hydraulic oil filtering and filling
The hydraulic oil is filtered when the tank is filled and at
each cycle. The transparent hydraulic oil inlet provides an
easy way to perform level check and diagnosis.
Customer Benefit
Low operating and maintenance costs. 065•
Protection of the starter motor
Starter motor is protected from damage of the driving
pinion. Ignition key can’t go to the start position if the
engine is running.
Customer Benefit
Low operating and maintenance costs. 073•
Fuel and hydraulic tank drain plug
Fuel and hydraulic tanks are equipped with drain plugs for
easy draining and cleaning.
Customer Benefit
Low operating and maintenance costs. 064•
To Next Page
Loading...
