Volvo IPS650 - Placement and Mounting of Hull Plug, Twin Installation

Placement of Reinforcement Rings
Around Hull Inserts
Material
Core material must be off a material with density
≥60
kg/m
3
(3.8 lb/ft
3
) or similar.
Dimensions
A Approx. 120 mm (4.7”)
B Approx. 100 mm (4.0”)
C 4 x 12 mm (0.5”) radius
Placement
Place the ring and adjust it to fit the hull conditions.
NOTICE! The ring core can be made of several seg-
ments.
Adjust core dimensions to meet final requirements.
A 137 mm (5.7”)
B 157 mm (6.2”)
P0011573
A
B
C
P0011595
P0012187
A
B
2
3
1
1 Inner lamination, see Lamination of Hull Inserts page
58.
2 Ring core
3 Outer lamination, see Lamination of Reinforcement
Beams page 76
Installation, Volvo Penta IPS
47704162 10-2014 © AB VOLVO PENTA 61