EasyManua.ls Logo

Volvo IPS950 User Manual

Volvo IPS950
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IPS 2
IPS650, IPS800, IPS950
Installation
1(1)
E
Question and Answer IconNeed help?

Do you have a question about the Volvo IPS950 and is the answer not in the manual?

Volvo IPS950 Specifications

General IconGeneral
BrandVolvo
ModelIPS950
CategoryOutboard Motor
LanguageEnglish

Summary

Safety Information

WARNING!

Indicates a hazardous situation with risk of death or serious personal injury.

Electrochemical Corrosion

Corrosion protection

Prevention of stray current during installation

Checking Protective Anodes

ACP

Checking electrochemical corrosion

Measuring drive unit insulation

Installation, Volvo Penta IPS

Propulsion Unit Installation

Engine Installation

Engine Mountings

Details installing engine mounts, checking bed planarity, incline, and load distribution.

Exhaust System

Cooling System

Coolant mixture

Provides warnings and instructions for mixing Volvo Penta coolant with water for optimal performance.

Freshwater System

Coolant

Recommends specific coolants and warns against improper mixtures or usage.

Coolant Level, Checking and Topping Up

Provides instructions for filling, checking, and topping up engine coolant, including safety warnings.

Fuel System

Fuel Tanks

Details tank location, suction height, return line installation, and cross-connection of twin tanks.

Fuel pressure

Details procedures for checking fuel feed pressure and the meaning of low feed pressure.

Lubrication System

Electrical System

Batteries

Explains battery terminology like Capacity and Cold Cranking Amps (CCA).

Battery Charging

Provides important safety instructions and parameters governing battery charging duration and risks.

Starting Battery Cable Area

Recommends cable cross-sections for providing sufficient power from battery to starter motor.

Fire Extinguishing System

Calibration and Settings

IPS Calibration

Outlines two calibration routines for IPS units: gear case setting and parallelism.

Launching and Sea Trial

Starting the Engine (Cold Start)

Provides essential safety warnings and general procedures for starting the engine, especially when cold.

Sea Trail

Outlines checks during boat test runs, including instruments, leaks, and achieving rated engine speed.

Related product manuals