Launching and Sea Trial
Launching and Starting
Checks before launching
•
Check that all valves and taps at hull fittings are
closed.
Checks after launching
Check the following before starting the engine.
IMPORTANT!
Recommendations for oil, fluids and grease: refer to
the Operator's Manual.
Check leakage risks
•
Check taps.
•
Check hull fittings.
Engine
•
Top off lubrication oil.
•
Check the status of drain taps and plugs.
•
Fill
with coolant; refer tothe Coolant Level, Checking
and Topping Up chapter.
Fuel system
•
Fuel level
•
Filters and taps
•
Venting, venting valve
To Next Page
Loading...
