Volvo IPS950 - Calibration and Settings; IPS Calibration

Calibration and Settings
IPS Calibration
On
new or renovated IPS unit installations two different
calibration routines must be carried out:
•
Calibration of the lower gear case factory setting
•
Calibration of lower gear case parallelism
Below is an overview of the calibration routines
together with a description of how the required special
tools must be used.
Further information regarding Volvo Penta IPS drive
unit calibrations and settings can be found in the
VODIA system.
IMPORTANT!
If a factory-set calibration or drive leg parallelity cali-
bration has not been performed, no gear can be
engaged.
IMPORTANT!
Drive leg calibration must always be carried out
according to the instructions.
Background
•
The boat may not be in the water.
•
The batteries must be fully charged or connected to
an external charging device.
•
No people or objects may be present inside the drive
leg operating area.
Calibration and Settings, IPS Calibration
142 47704162 10-2014 © AB VOLVO PENTA