Propulsion Unit Installation
Propulsion Unit
IMPORTANT!
The
emergency steering toolkit must be delivered with
the boat.
Check chassis number
It is important to check that the power steering unit
(SUS) chassis number and engine chassis number are
identical. The engine chassis number is located on the
engine cover, and the SUS chassis number is on a
decal on the outside of the packaging and on the top
of the SUS.
NOTICE! Do not assemble the equipment together if
the numbers do not correspond; the engine and power
steering will not work together.
Installation
1 Dry off the upper rubber seal and apply sealant
part # 3817243. Do this as late as possible before
drive unit installation.
IMPORTANT!
Do not use petroleum jelly or grease.
Lay the clamping ring in place on the inside of the
IPS ring.
Installation, Volvo Penta IPS
47704162 10-2014 © AB VOLVO PENTA 87
To Next Page
Loading...
