POWER* FRONT SEATS
Use the controls on the outer side of the seat to adjust e.g. the seat
position and lumbar support*. The two controls shaped like a seat
are used to adjust the position of the seat. The third, multifunction
control* is used to adjust the various comfort functions, e.g. mas-
sage*.
The seat-shaped controls
Adjust the seat cushion or move the whole seat using the lower
control. Adjust the angle of the backrest using the rear control.
Multi-function control
3
Settings for massage*, side support*, lumbar support* and seat
cushion extension* are linked to the multi-function control.
1. Activate seat setting in the centre display by turning the control
up/down.
2.Toggle between the different functions in the centre display by
turning the control up/down.
3.Change the setting of the selected function by pressing in the
upper/lower/front/rear part of the control.
Store positions
1.
Set the seat, door mirrors and head-up display* to the desired
position and press the M button on the door panel. The light indi-
cator in the button illuminates.
2.Within 3 seconds, press the memory button 1 or 2. An acoustic
signal sounds and the light indicator in the M button extin-
guishes.
To use your stored position:
With the door open - push and release one of the memory buttons.
With the door closed - hold one of the memory buttons pressed in
until the stored position is reached.
3
On cars with four-way lumbar support*
To Next Page
Loading...
