Graphic Display 131
Recall
An acknowledged fault message can be re-
called, i.e. be shown on the graphic display
again.
MENU: FAULTS?
1 SELECT confirms the choice of the
menu FAULTS? The last acknowl-
edged fault message is shown. If there
is more than one message, a down ar-
row is shown in the right-hand corner.
2 The up/down buttons move the cursor
between the current messages.
If an acknowledged fault message is still ac-
tive at the next occasion the ignition key is
turned to the ON position this is shown as
a non-acknowledged message. NO FAULTS
is shown if there are no fault messages.
To Next Page
Loading...
