180 Heating and Air Conditioning
A/C Control
When the vehicle is equipped with air con-
ditioning, the control panel has a button for
engaging the air conditioning compressor.
This button is marked with a snowflake
symbol. When the A/C is engaged, the
green LED light in the button is on.
When the air conditioning button is
pressed, the fan speed control must be set
on 1 through 4 for the air conditioning to
start. If the air conditioning button is
pressed when the fan speed control is set
on 0, the air conditioning will not start.
To set the air conditioning temperature, ad-
just the temperature control and fan speed
until the desired temperature/air flow has
been reached. If the cab temperature needs
adjusting, the temperature or fan speed has
to be adjusted again until the new desired
temperature has been reached.
W8001470
To Next Page
Loading...
Need help?
General
