Seats 201
Back Rest Support
In the middle of the back rest there are
three inflatable cushions (1, 2 and 3) that
supports the lumbar region of the back.
Each cushion is controlled by an individual
control. Move each control, 1, 2 or 3, for-
ward to inflate or rearward to deflate the
respective cushion.
On the sides of the back rest there are
cushions (4) for the side support of the
back. Both cushions are controlled by con-
trol 4. Move the control forward to inflate
or rearward to deflate cushions.
Seat Heater
There are two heater elements (5) in the
seat. One in the seat cushion and one in the
lower part of the back rest. They are oper-
ated by the switch 5 on the side panel.
The elements are regulated by internal ther-
mostats and will therefore hold a steady
temperature.
W8001829
To Next Page
Loading...
